Canon DR-5060F Instructions Manual page 81

7
Use a clean, dry cloth to wipe the scanning glasses.
Scanning glasses are located above and below in the feed unit. Wipe both of
these scanning glasses clean.
CAUTION
Never spray mild detergent or water directly on the scanning glasses. The spray
could penetrate below the glass, and contaminate the internal light source and
lenses.
8
Wipe the rollers with a firmly wrung cloth moistened with water or
mild detergent while rotating the rollers.
Rollers are located at the positions indicated in the figure below. Turn these
rollers in the direction of the arrows as you wipe them clean.
Scanning glasses
Rollers
5
79
Daily Cleaning