Handling The Camera Unit; Loading Film - Canon DR-5060F Instructions Manual

Handling the Camera Unit

The following describes camera unit handling procedures starting from loading of
film in the camera unit through to placing and removing the camera unit from this
unit, and removing film.

Loading Film

1
Press the release notch to open the camera unit's cover.
MEMO
When you buy the camera unit, the camera unit holds an empty take-up reel
inside. If there is no take-up reel inside the camera unit, contact a Canon
service department.
2
Take the microfilm out of its case.
Release notch

Handling the Camera Unit

2
25