Canon DR-5060F Instructions Manual page 52

Manual
Use this mode to scan documents that are not fed well (e.g. paper quality that is
more likely to cause double feed). In this mode, you load the document one page
at a time with the Feeding Option key set to "Manual."
1
Before you press the Feeding Option key on the operation panel
to light [Manual] lamp, place one sheet of the document on the
document tray and set the paper guide for the width of the
document you are going to scan.
NOTE
If Feeding Option is set to [Manual] in the Filmer Only mode, scanning is
started once the sensor detects the document placed on the document tray.
Before you press the Feeding Option key on the operation panel to light
[Manual] lamp, set the paper guide for the width of the document you are going
to scan.
2
Remove any pages from the document tray, and press the Feeding
Option key to light the [Manual] lamp.
The document tray rises.
CAUTION
Take care not to nip your fingers in the document tray.
50
Setting Scan Conditions