Canon DR-5060F Instructions Manual page 8

CAUTION
The scanner weighs about 48 kg (105.8 lb.). To avoid damage to the unit,
never place the unit on an unstable or vibrating surface. The unit may tip or
fall over, and cause an injury.
To avoid overheating and causing a fire, never block the air vents on the rear
of the scanner.
Keep all liquids, beverages, or any type of liquid, and clips, staples,
necklaces or other metal objects away from the unit. If you accidentally spill
liquid or drop a metal object into the unit, turn the unit power OFF,
disconnect the power cord from the power outlet, and call for service
immediately.
Never install the unit in humid or dusty locations. Doing so might cause fire
or electrical shock.
Never place objects on top of the unit. Such objects may tip or fall over, and
cause an injury.
When you remove the power cord, grip it by the plug head. Never attempt to
disconnect the cord from the outlet by pulling on the cord. Doing so might
expose or break the core leads, damage the power cord, and cause fire or
electrical shock.
Keep the area around the power outlet clear of all obstacles so that you can
disconnect the power cord easily at all times.
Never spill water or any type of volatile solution (alcohol, benzene, paint
thinner) into the unit. Doing so might cause fire or electrical shock.
When the unit is not being used for a long time, disconnect the power cord
from the power outlet.
Avoid wearing loose fitting clothing, dangling jewelry, long ties, or even long
hair that could become entangled with moving parts, especially the rollers
that feed the unit. If such objects become entangled, immediately disconnect
the power plug from the power outlet to stop the unit.
Be very careful when you are loading a document or removing a paper jam.
You may be injured unexpectedly. For example, the paper edges may cut
your fingers.
Do not open the upper unit while the scanner is operating. Doing so might
result in malfunction or injury.
Do not directly touch the pins and contacts on the scanner connector with
your hands. Doing so might result in malfunction.
6
Safety Precautions