Replacement Parts - Canon DR-5010C Startup Manual

24-bit Color
Amount of paper that can be
stacked in automatic feeder
Interface
Other Functions
Dimensions (with trays closed)
Dimensions (with trays open)
Weight
Power Supply
Power Consumption
Noise
Operating Environment
• The functions described above can be used if they are supported by the application
software.
• Some functions may not be available, depending on the performance of your PC and on
your software.
Due to our ongoing efforts to improve our products, the specifications described above are
subject to change without notice.
Options
Bar code module (product code: 0434B003)
Additional software to allow the ISIS/TWAIN driver to recognize bar codes.

Replacement parts

Exchange roller kit (product code: 0434B002)
Kit to replace the feed rollers (pickup roller, feed roller, and retard roller).
• Refer to "Removing and Attaching the Rollers," on p. 67 for information about replacing
the rollers.
• Contact your local authorized Canon dealer or service representative for detailed
information about the options and replacement parts.
88
Specifications
Simplex
200 x 200 dpi
300 x 300 dpi
600 x 600 dpi
Duplex
200 x 200 dpi
300 x 300 dpi
600 x 600 dpi
10 mm stack, maximum
(100 sheets of 20 lb bond (80 g/m
SCSI-III / Hi-Speed USB 2.0
Double feed detection, skew detection
15.6" x 12.3" x 7.5" (W x D x H)
398.4 mm x 312 mm x 191.4 mm (W x D x H)
15.6" x 26.3" x 7.6" (W x D x H)
398.4 mm x 668 mm x 194 mm (W x D x H)
Approximately 23 lb (10.2 kg)
AC 120 V (60 Hz) or AC 220-240 V (50 / 60 Hz)
120 V model
Scanning: 1 A maximum
Standby: Under 4.2 W
Not more than 61 dB
Temperature:
Humidity:
50 pages/minute
40 pages/minute
6 pages/minute
100 images/minute
70 images/minute
16 images/minute
2
))
220-240 V model
0.5 A maximum
Under 4.2 W
10˚C to 32.5˚C (50˚F to 90.5˚F)
20% to 80% RH