The Pc Does Not Recognize The Scanner; (Connecting Via Usb 2.0) - Canon DR-5010C Startup Manual

The PC Does Not Recognize the Scanner

(Connecting via USB 2.0)

The following are possible causes of the PC failing to recognize the scanner.
Check each possible cause.
Cause The scanner is not connected correctly.
Remedy
Check the USB cable connections between the scanner and the
PC. (See "Connecting USB Interface," on p. 23.)
Cause The USB 2.0 interface card is not inserted in the PC
correctly.
Remedy Reseat the USB 2.0 interface card on the PC correctly referring to
the instruction manual for the USB 2.0 interface card. Also,
confirm whether the USB interface card is recognized by the
operating system (Windows) you are using.
Cause The scanner is not ON.
Remedy Refer to "The Scanner Does Not Turn On," on p. 81 and maker
sure that the scanner is turned ON. If the scanner is not turned
ON, turn it ON. (See p. 25.)
Cause The USB 2.0 interface card does not support the scanner.
Remedy
Use a recommended USB 2.0 interface card. (See "USB 2.0
Interface Card," on p. 19.)
Cause The scanner does not support the USB cable.
Remedy Use the USB cable provided with the scanner. (See p. 23.)
Cause The scanner does not support the USB HUB.
Remedy Remove the USB HUB to use the scanner. (See p. 23.)
84
Troubleshooting