Canon DR-5010C Startup Manual page 55

IMPORTANT
• When scanning documents that are fastened together, such as invoices, set
the edge that is fastened together as the leading edge.
• Note that when scanning with nonseparated feed, if you place several
documents that are not fastened together on the feed tray at one time, they
will be fed together.
• Particularly, very thin or curled documents will not be fed very well. In this
case, lightly press on the leading edge of the documents when you set them.
When doing this, be careful not to get your fingers stuck in the pickup
roller.
• After you finish scanning, close the Document Feed Tray and the Document
Eject Tray Extension to prevent damage to the scanner while it is not being
used.
Pickup Roller
53
Using the Scanner