Installing The Software; Installing The Isis/Twain Driver - Canon DR-3080CII Startup Manual

Installing the Software

IMPORTANT
Before installing the software, be sure to open and read the Readme.txt file on
the setup disc.
The setup disc included with the scanner contains the following software:
● ISIS/TWAIN driver
This driver allows this scanner to be used with ISIS-compatible application
software or TWAIN-compatible application software. The driver must be
installed in order to be able to use the scanner.
● CapturePerfect
This is a TWAIN-compatible software application. Install this application
if necessary.

Installing the ISIS/TWAIN Driver

Follow the procedure described below to install the ISIS/TWAIN driver.
IMPORTANT
If another ISIS-compatible driver is already installed in your PC, you must
back up the files listed below. These files may be overwritten when you install
this ISIS/TWAIN driver.
C:\Windows\System\pix*.dll
C:\Windows\PixTran\*.*
Note
The name of the "\Windows" and "\Windows\System" folder varies,
depending on which version of Windows you are using. Substitute the above
folder names with the relevant folder names for Windows used in your
system.
1.
Turn on your PC. Windows starts.
IMPORTANT
If you are using Windows NT 4.0 Workstation, Windows 2000 Professional,
or Windows XP, be sure to log on as a user with administrator privileges.
2.
Load the setup disc in the PC's CD-ROM drive.
26
Installing the Software