Power; Moving The Scanner - Canon DR-3080CII Startup Manual

● Avoid locations that are subject to rapid temperature changes.
Condensation inside of the scanner can result in inferior image quality. Use
this scanner under the following environmental conditions:
Temperature:
Humidity:
● Avoid locating the scanner near equipment that generates electromagnetic
fields, including speakers, televisions, and radios.

Power

● Before you plug the power cord into an outlet, be sure that the power
source meets the requirements of the scanner.
● Do not connect this scanner to a power outlet that is shared with other
equipment. When using an extension cord, make sure that the extension
cord is rated for the current requirements of the scanner.
● Do not place other objects on the power cord. Do not step on the power
cord.
● Do not bundle the power cord, and do not wrap the power cord around a
table or chair leg.
● Do not pull on the power cord. Always grasp the plug when unplugging the
power cord.
● Do not place other objects around the outlet.
● If you have any questions concerning your local power supply, contact
your local authorized Canon dealer or your local power company.

Moving the Scanner

● To avoid dropping or damaging the scanner, always carry it with two
hands. The scanner weighs approximately 17.8 lb (8.1 kg).
● Make sure to disconnect the interface cable and power cord. If the scanner
is transported with these items plugged in, the plugs and connectors may be
damaged due to physical shock or concussion.
6
Before Using the Scanner
10˚C to 32.5˚C (50˚F to 90.5˚F)
20% to 80% RH