PRESONUS FaderPort 16 Owner's Manual page 40

5 Cubase / Nuendo (MCU)
5.1 Getting Started
Once you have connected your FaderPort to your computer and
the power supply, power it on and, launch Cubase or Nuendo to
set up the FaderPort as a Mackie Control Universal device.
FaderPort 16 Users: Because Mackie Control Universal is an
8-channel protocol, you will need to create two Mackie Control
devices: one for the right bank and one for the left bank.
The FaderPort 16 presents two MIDI ports when connected to a computer.
While in MCU (Cubase) mode, MIDI Port 1 controls the left bank of eight faders.
MIDI Port 2 controls the right bank of eight faders as well as the buttons.
1. Go to Studio | Studio Setup.
2. In the Setup window, click the "Add/Remove" menu
to add the first Mackie Control device.
3. Select "Mackie Control" from the pull-down menu.
4. Set the MIDI Input and Output to "PreSonus FP16 Port
2" or "PreSonus FP8" (model dependent).
FaderPort™ Multichannel Production Controllers
Owner's Manual
37