PRESONUS FaderPort 16 Owner's Manual page 29

4 Logic (MCU)
4.1 Getting Started
7. Right-click on the Mackie Control in the Control Surface
Setup and select Show/Hide Inspector.
8. In the Inspector, set the Input and Output ports to "PreSonus
FP16 Port 1" or "PreSonus FP8" (model dependent).
FaderPort 8 Users: Your FaderPort 8 is now ready to use!
FaderPort 16 Users: Please continue through the
remaining steps to complete set-up.
9. In the pop-up menu, go to New | Install...
10. From the list of devices, select Mackie Control Extender.
11. Click Add.
FaderPort™ Multichannel Production Controllers
Owner's Manual
26