PRESONUS FaderPort 16 Owner's Manual page 34

4 Logic (MCU)
4.4 The Session Navigator
Large Marker Mode
Temporary Marker Mode
While in Large Marker Mode, the Select buttons will control the following functions:
Marker3
Marker1 Marker2
1 2 3
1. Select 1. Marker 1
2. Select 2. Marker 2
3. Select 3. Marker 3
4. Select 4. Marker 4
5. Select 5. Marker 5
6. Select 6. Create new marker at current playback position
7. Select 7. Create new marker at nearest bar
8. Select 8. Delete nearest marker
While in Temporary Marker Mode, the Select buttons
will control the following functions:
Bar
Nudge Pickup
1 2 3
1. Nudge. Press the Select button below Nudge then
use the Pan/Param knob to change setting.
2. Pickup. Press the Select button below Pickup to move the
selected region to the current playhead position.
3. Bar. Press the Select button below Bar then use the Pan/
Param knob to nudge the selected region by bars.
4. Beat. Press the Select button below Beat then use the Pan/
Param knob to nudge the selected region by beat.
5. Division. Press the Select button below Divisn then use the Pan/
Param knob to nudge the selected region by project division value.
6. Ticks. Press the Select button below Ticks then use the Pan/
Param knob to nudge the selected region by single ticks.
7. Frames. Press the Select button below Frames then use the Pan/
Param knob to nudge the selected region by one SMPTE frame.
8. Fram/2. Press the Select button below Fram/2 then use the Pan/
Param knob to nudge the selected region by half a SMPTE frame.
FaderPort™ Multichannel Production Controllers
Marker4 Marker5 Cr w/o
4 5 6
Beat Division Ticks
4 5 6
Owner's Manual
Create Delete
7 8
Frames Fram/2
7 8
31