Stihl MS 210 Instruction Manual page 30

English
20.6.1 Versions with manual fuel pump
► Press the manual fuel pump bulb at least five
times – even if the bulb is already filled with
fuel.
20.6.2 Versions with decompression valve
► Press in the button to open the decompression
valve.
30
20 Starting / Stopping the Engine
The decompression valve closes as soon as the
engine fires.
► For this reason you must press in the button
before each starting attempt.
20.6.3 All models
1
► Push the hand guard (1) forward – the chain is
locked.
► Press down the trigger lockout (2) and pull the
throttle trigger at the same time. Set Master
Control lever (3) to:
Choke shutter closed (l)
– If the engine is cold (also use this position if
the engine stopped when you opened the
throttle after starting)
Starting throttle position (n)
– If the engine is warm, i.e. if it has been running
for about one minute.
► Hold and start your saw as described.
20.7 When engine begins to fire
► Set the Master Control lever to the starting
throttle position (n ).
► Hold and start your saw as described.
0
2
3
0458-208-0121-C