Stihl MS 210 Instruction Manual page 23

14 Fueling
14.3.5 If the filler cap can be moved or
removed
The base of the filler cap is twisted in relation to
the upper part.
left: Base of filler cap twisted
right: Base of filler cap correctly posi‐
tioned
► Fit filler cap and turn it counterclockwise until it
engages in the seat of the filling port
► Continue to turn the filler cap counterclockwise
(approx. 1/4 turn) – this will twist the base of
the cap into the correct position
► Turn the filler cap clockwise and close it – see
the section "Closing" and "Checking the lock"
14.4 Filler cap with marking
14.4.1 To open:
► Open bracket
0458-208-0121-C
► Turn filler cap (approx. 1/4 turn)
Markings on filler cap and fuel tank must align
► Remove the filler cap
14.4.2 Filling with fuel
Take care not to spill fuel while fueling and do
not overfill the tank.
STIHL recommends using the STIHL filling sys‐
tem for fuel (special accessory).
► Fill with fuel
English
23