Mounting Blade Hangers; Mounting The Pulley Cover; Mounting The Switch Box - RIDGID BS1400 Owner's Manual

Mounting Blade Hangers

1. From the loose parts bag find the fol-
lowing items.
4 Screw Pan Head M4 x 0.7-10
4 Nut Hex M4 x 0.7
4 Lockwasher External M4
2 Blade Hangers
2. From the loose parts find the following
item.
1 Pulley Cover
3. Attach the blade hangers on the pulley
cover as shown.

Mounting the Pulley Cover

1. From the loose parts bag find the fol-
lowing items.
3 Screw Pan Head M5 x 0.8-12
(approx. 1/2")
6 M5 Washers
3 M5 Nuts
2. Place pulley cover over both pulleys
and fasten to stand using three pan
head screws, six washers, and three
hex nuts, as shown.

Mounting the Switch Box

1. From the loose parts find the following
hardware:
2 Screw Pan Head M5 x 0.8-12
(approx. 1/2")
2 Lockwasher Ext. M5
2. Mount switch box assembly to frame
as shown using hardware listed.
Screw Pan Head
M4 x 0.7-10 (4)
Nut Hex
M4 (4)
Blade Hanger
Nut Hex
Lockwasher
Screw Pan Head
M5 x 0.8-12
Nut Hex M5
Pulley
Cover
Screw
Washers
Nut
Screw Pan Head
M5 x 0.8-12
Lockwasher
Screw
Lockwasher
19
Lockwasher
External M4
Pulley Cover
Screw
Washer Flat
M5 x 10 Dia.
Lockwasher
External M5