-↑
+↓
Motor 6 Rain sensor function (1 - 2) F[2]. Set the action when the input is
active, as follows:
P604
• 1=open
• 2=close
-↑
+↓
Motor 6 Timer function F[0]. Set the action when active as follows:
• 0=none
P605
• 1=open
• 2=close
-↑
+↓
Add
Adds PIK radio remote control channel in the memory
-↑
+↓
Changes the association:
chc
Motor No.
-↑
+↓
dEL
Deletes PIK radio remote control channel from the memory
-↑
+↓
Restores the Default values (press twice and the message "end"
rESE
appears).
6.2.2. Errors table
The following messages appear on the display in case of error:
(display)
- FULL – radio remote control memory full
- Err
6.3.
Settable functions
6.3.1. General Open-Close (on main board) - In01, In02
For simplicity, from now on the opening of the window is associated with
forward movement of the motor and closing of the window is associated with
backward movement of the motor.
Two "General Command" control inputs "in01" and "in02" of the voltage-free n.o. / n.c.
type are provided on the terminal block.
Activation of the general open or general close command affects all the motor outputs of
the associated modules: motor 1-motor 2 of the first module, motor 3-motor 4 of the
second module and motor 5-motor 6 of the third module.
- the radio remote control is not recognized in either delete or
write
PIK radio remote control channel No.
Page 12