Macintosh Printing Software - GCC Technologies Elite 12/1200N Installation Manual

S 9 . I
TEP A NSTALL
U E
SING THE LITE
You must install GCC printer software on your Macintosh to use your Elite 12 printer. This
software is on the Elite 12 Series CD-ROM that shipped with your printer. Follow the
software installation instructions that correspond to your printer connection.
I
NSTALLATION FOR
(R M
EQUIRES ACINTOSH OPERATING SYSTEM
Before installing this software, be sure that the printer is connected to the Mac using an
appropriate cable and that both the printer and the Mac are powered on. Also confirm that
all the steps in the Hardware Setup section of this manual have been followed.
P O - I
ART NE NSTALLING THE
M
ACINTOSH PRINTING SOFTWARE
12 S
ERIES WITH A
P C
RINTERS ONNECTED BY
8.6
OR HIGHER
GCC
DRIVER SOFTWARE AND FONTS
M
ACINTOSH
USB
)
1. Close any open programs.
2. Open the CD drawer, insert the
GCC CD-ROM, and close the drawer.
3. A window opens on the Mac screen called
"Elite 12 Series CD-ROM"
4. Double-click on the "Elite 12 Software
Installer" icon.
5. The title screen of the installer opens.
Click the Continue button.
19