Chapter 5 Operating The Jv-240Uv; Hardware Operation; How To Set Flatbed Printing Mode - GCC Technologies JV-240UV User Manual

JV-240UV User Manual

Chapter 5 Operating the JV-240UV

5.1 Hardware Operation

5.1.1

How to Set Flatbed Printing Mode

NOTICE:
The factory setting of the height between print media and print head is 3mm.
If the height between print media and print head is more than 3mm, it may cause ink droplet
misting or splashing and lead to a grainy and uneven printing.
When the height between print media and print head is more than 3mm, the reflected light from
UV curing lamp increases and it can cause the misting ink to be cured, increase the ink visocosity
and nozzel clogging, and hence damage print heads.
NOTICE:
It is suggested to use the lamilator with decurling device to keep the sheet flat.
36