Adding/Removing Z-Wave Devices - Trane ComfortLink II XL1050 Manual

To Add or Remove Z-Wave Devices select: Home
Screen > Menu > Smart Home
Your XL1050 is designed to integrate seamlessly
with Trane Home.
32-5093-04B-EN

Adding/Removing Z-Wave Devices

Adding Z-Wave Devices
1. From the HOME Screen, select MENU,
then select SMART HOME.
2. Select ADD DEVICE and follow the device
manufacturer's instructions for setting the
Z-Wave device into learn mode. You will
have four minutes to set the device into
learn mode after selecting the ADD
DEVICE button.
Removing Z-Wave Devices
1. From the HOME Screen, select MENU,
then select SMART HOME.
2. Select REMOVE DEVICE and follow the
manufacturer's instructions for setting the
Z-Wave device into learn mode. You will
have four minutes to set the device into
learn mode after selecting the REMOVE
DEVICE button.
Advanced Z-Wave Settings
Select ADVANCED for advanced Z-Wave
functions including unregistering your bridge
from Trane Home or factory resetting your
bridge. See the Advanced Z-Wave Settings
section for more information.
Update Network
Select UPDATE NETWORK to update the
network of your bridge. Updating the network
can generate a lot of Z-Wave traffic over the
network and can take up to 15 minutes to
complete.
page 27