Trane ComfortLink II XL1050 Manual page 22

Changing the Schedule (cont.)
Changing Period Start or End Times
1. Select anywhere in a Period to make it
active. Other Periods will dim and the Start
and End times for this Period will be in black
boxes at the top of the screen.
2. Select TIME START or TIME END and
adjust the time using the UP and DOWN
arrows. Note: The XL1050 uses intelligent
technology and will not allow setting an
illogical start or end time. Periods must be
at least 30 minutes in duration.
Changing Period Set Points
1. Select the active Period's Cooling or Heating
Temperature Set Point.
2. Adjust the Set Point using the UP or DOWN
arrows.
Changing the Period Name
1. Select the PERIOD NAME (Wake, Away,
etc.).
2. Select a predefined name or select NEW
and select NEXT.
3. If selecting a new name, enter the name
using the on-screen keyboard.
4. Select NEXT.
page 22
Adjust start and
end times
Schedule Mon
6:00am 8:00am
Time
75º
Start
Wake
Time
End
70º
To rename a Period,
press in the gray area.
To change temperature settings press in the red or blue
area, then adjust the setting up or down with the arrows
on the right.
Tue Wed Thu Fri
6:00pm
Cool To
75º 75º
Away Home
70º
70º
Apply
Select APPLY to save
changes and exit.
Sat Sun
10:00pm
75º
Day
Sleep
70º
Cancel
Select CANCEL to discard
all changes and exit.
XL1050 User Guide