Punch - Canon iR3300 Series Printer Manual

3

Punch

3-16 Settings Menu
- Finisher-J1
Staple
Position Corner
Corner
(Upper-R)
(Upper-L)
Paper Size
11x17 No Yes
Legal No Yes
Letter Yes No
Letter-R No Yes*
Executive Yes No
A3 No Yes
B4 No Yes
A4 Yes No
A4R No Yes*
JIS-B5 Yes No
NOTE
• The maximum number of sheets that can be stapled is 15
for A3 and 11x17, 20 for B4 and Legal, 30 for A4, A4R,
JIS-B5, Letter, Letter-R and Executive. If the number of
sheets is greater than this, they will not be stapled.
• Make sure to select compatible settings when using
Staple Sort and Punch simultaneously. If conflicting
settings are selected, such as the staple setting for the
right side of the paper and the punch setting for the left,
the printer will use neither Staple Sort nor Punch.
None, Top, Bottom, Left, Right
This setting enables you to specify the desired paper edge for holes to be
punched for binding (two or four holes).
NOTE
• This function can only be selected if a Saddle Finisher-G1
is installed with a Puncher Unit-G1, a Puncher Unit-J1 or
a Puncher Unit-H1.
• Acceptable paper sizes for this option are A3, B4, A4, JIS-
B5, 11x17, Legal, Letter or Executive.
• Make sure to select compatible settings when using
Staple Sort and Punch simultaneously. If conflicting
settings are selected, such as the staple setting for the
right side of the paper and the punch setting for the left,
the printer will use neither Staple Sort nor Punch.
Corner Corner Capacity
(Lower-R) (Lower-L) (Sheets)
No Yes 15
No Yes 20
Yes No 30
No Yes* 30
Yes No 30
No Yes 15
No Yes 20
Yes No 30
No Yes* 30
Yes No 30