Printing Problems - Canon iR3300 Series Printer Manual

Printing Problems

Meaningless characters are being printed
Cause 1
Solution
Reference
Cause 2
Solution
Reference
A font that is different to the one specified is printed
5
Cause
Solution
Reference
You cannot print the last page
Cause
Solution
Reference
5-6

Printing Problems

You have printed from Windows without installing the printer driver for Windows that
was included with the printer.
Install the printer driver for Windows that was included with the printer and print the
data again.
See the PCL Driver Guide and the PS Driver Guide.
DOS application software printer settings are inadequate.
Reset the DOS application software printer settings on a printer that is compatible with
the machine.
See the PCL Driver Guide and the PS Driver Guide.
The "Replace with TrueType font" setting has been set on the printer driver for
Windows.
Set the "Replace with TrueType font" setting to the correct setting and print the data
again.
See the Help function on the printer driver.
The command that identifies the end of the data has not been sent from the PC (The
Processing/Data lamp is flashing or lit.).
Clear the print data. (When you print from application software that does not have a
print function and the last page of data is less than one page, the data will remain in the
printer's memory.)
See "Operating Print Jobs Sent from a Computer," in the Reference Guide.