Culligan Medallist Series Installation And Operation Instructions With Parts List page 20

Step 4 – Programming Fast Rinse Time
Press the "STATUS" key after programming the backwash time.
The display will blink "Fr" for 3 seconds and then display the Fast Rinse Time in
10
minutes.
Adjust the setting with "+" or "-" key. (5-30 minutes)
Step 5 – Days to Regeneration
Press the "STATUS" key after programming the fast rinse time.
The display will blink "CAP" for 3 seconds and then display the number of days
3
between regenerations.
Adjust the setting with the "+" or "-" key. (1-42 days)
Exiting Program Mode
From Step 5 press the "STATUS" key.
The display will go blank.
Press the "STATUS" key again to exit programming.
Note: The control will exit the programming mode if no key press activity takes place within one minute.
Locking the Programmed Menu
Press and hold the "+" key for 3 seconds while in the service mode.
The display will show the status of the lock feature. ("LoC" or "unL")
Adjust with the "+" or "-" key.
Press the "STATUS" key to return to the service mode.
Note: While the programmed menu is locked ("LoC") all of the programming menu
items will display, however only the time of day can be changed.
Note: If programming times out, values will not be saved. The "Status" key must be pressed to save values.
®
17 Culligan Medallist Series Water Filters