Removing Printed Media From The Media Take-Up Unit - Canon W7200 User Manual

16

Removing Printed Media from the Media Take-up Unit

1
2
2-36
Print Media You Can Use
On the Media Take-up Unit, set the take-up mode switch to Auto.
The completes the installation of the Media Take-up Unit. You can now
execute print jobs from the computer.
When the print job is finished, follow the procedures below to remove the
printed media from the Media Take-up Unit.
Press the Online button to display "Offline".
Paper Source
Press to feed the roll media by a small amount.
If you want to save the roll media that you are about to remove, feed the roll
media about one full turn of the roll.
Paper Source
Data Message
Roll Media
Cut Sheet
Cancel nter
Data Message
Roll Media
Cut Sheet
Cancel nter
Power
Online
Power
Online