Canon W7200 User Manual page 138

Ink level ?
Problem 1: The ink level detection function is set to off.
Solution:
Solution:
Cut Failed
Problem 1: Leading edge of the roll media not detected after cutting.
Solution:
Load Cut Sheet
Problem 1: The tray is waiting for a cut sheet to be loaded.
Solution:
Eject Cut Sheet
Problem 1: The printer received print data for the roll media while a cut sheet was
Solution:
Remove Cut Sheet
Problem 1: The tray is waiting for a cut sheet to be removed.
Solution:
Close xxx Cover ("xxx" name of the cover)
Problem 1: The named cover named is open.
Solution:
7-14
Troubleshooting
The message is displayed when the print job is executed, and the printer is
set to offline. Press the Online button to continue the print job.
To retrieve the ink level display, replace with the ink tanks specified for
use with this printer.
The cutter cut off the end of the media. Re-load the roll media. (Æ P.2-7)
Load the cut sheet in the tray and press the Online button, or cancel the
print job. (Æ P.2-18)
loaded.
Remove the cut sheet and load the roll media. (Æ P.2-7)
Remove the cut sheet from the tray. (Æ P.2-18)
Close the named cover.