Caution About Using Refilled Ink Tanks For This Printer; Switching Off Ink Level Detection; Executing Print Job - Canon W7200 User Manual

Caution About Using Refilled Ink Tanks for This
Printer
Caution

Switching Off Ink Level Detection

1
2
3
4
5
Note

Executing Print Job

6-8
Maintenance
The ink tanks specified for use with this printer are provided with an ink
level detection function to prevent the tanks from running out of ink during
printing and to prevent damage to the printhead.
When using refilled ink tanks, the printer cannot detect the ink level and stop
printing due to ink shortage. If you use such ink tanks, then the ink level
detection function must be switched off.
Printing with the ink level detection function switched off could damage the
printer, especially the printhead, or could cause the printer to operate
abnormally in other ways. Canon is not responsible for damages or injuries
caused by such actions.
z Once the ink level detection feature is switched off, the ink level detection
information cannot be recovered. If you want to display the ink level
detection information, you must switch the ink level detection function on
and then install new ink tanks specified for use with this printer.
z Repeatedly removing the same ink tanks from the printer could cause ink to
leak from the tank and damage the printer.
Press the Online button twice to display "MAIN MENU".
Press or to display "System Setup", then press
Press or to display "Ink Check Off", then press
Press or to display the name of the ink tank ("Bk Ink Tank", etc.),
then press the Enter button.
When "Execute?" is displayed, press
press the Enter button.
The ink level detection feature is switched off for the ink tank you selected.
z Press the Online button to cancel these procedures.
After switching ink level detection function off, the "Ink level ?" message
will be displayed on the printer operation panel for every print job and the
printer will go offline. To continue the print job, on the printer operation
panel press the Online button.
.
.
or to select "Yes", then