Installation - Viessmann Vitosol-F Installation Instructions Manual

Installation with mounting brackets
Fig. 16
Supporting rails:
B
For type SV with snow loads of 4.80 kN/m

Installation

On-site fixings are required for securing the mount-
A
ing brackets (see diagram below).
A
1.
Fig. 17
Note on step 1:
Screws to be provided on site
Type
SV
SH
18
(cont.)
2
90 °
2.
a in mm
1650 1900
–
600
–
B
The installation of the mounting bracket is shown using
standing seam profiles as an example.
The horizontal arrangement of the mounting brackets
depends on the rafter spacing (see page 6 onwards).
All mounting brackets between the first and last
bracket must be in alignment with each other.
700