Panasonic KV-S2065L Service Manual page 28

shaft in the direction of the arrow [(3)].
Note:
Confirm if pin A and pin B are inserted in their notches correctly.
Attach the Retard Roller Module so that the notch A is on the left
side.
11. Hold the Conveyor(Lower) using both hands, and close the
Conveyor by pushing it into the unit.
Note:
When the conveyor is closed, the click-stop mechanism will
operate. If the Conveyor is not closed correctly and operation in
step 12 as is done, the Conveyor may break.
12. Close the Front Door.
Note 1:
28