7.4. Sensor Roller Cleaning
1. Open the Front door.
2. Clean the Sensor Roller with cleaning paper (KV-SS03), as shown
in Fig. 7-3.
Note:
If the Sensor Roller is removed while cleaning, re-attach it after
cleaning as follows.
7.4.1. Re-attachment of the Sensor Roller Assembly
When the Sensor Roller is removed for cleaning the inside of the scanner, reattach it as shown
below.
Lower Sensor Roller:
1. Attach the roller by placing the gear side to the left side of the
scanner and inserting both side's bearings into the guide grooves.
20