3. Press the HOME key.
- The display will change to the select language, then the
scanner will be ready.
- This setting will remain until it is changed to another setting.
4.9.2. Setting the SCSI ID and Terminator
1. Press the OTHERS Key.
Enters setting modes other than SCAN, COUNTER, or IMPRINT
and displays the version
2. Press the MODE Key.
Press the MODE Key [
fourth setting.
3. Press the SELECT [
setting.
The [
] Key moves to the next ID as shown below.
The [
] Key moves to the previous ID.
] to display the SCSI ID, which is the
] Key or [
] Key to select the desired
11