Setting The Clock - Sony MHC-EC68USB Operating Instructions Manual

To use the remote
Slide and remove the battery

compartment lid , and insert the two
supplied R6 (size AA) batteries,  side
first, matching the polarities shown
below.
Notes
 With normal use, the batteries should last for
about six months.
 Do not mix an old battery with a new one or
mix different types of batteries.
 If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
 Batteries installed devices shall not be
exposed to excessive heat such as sunshine,
fire or the like.

Setting the clock

Use buttons on the remote to set the
clock.
1

Press /
to turn on the
system.
2
Press CLOCK/TIMER SET
The hour indication flashes. If "PLAY
SET" flashes, press /
repeatedly to select "CLOCK, " and
then press ENTER
3
Set the time.
4
Press /
to set the hour, and then press

ENTER .
5
Use the same procedure to set
the minutes.
Note
The clock settings are lost when you disconnect
the power cord or if a power failure occurs.
To display the clock when the system
is off

Press DISPLAY repeatedly until the
clock is displayed. The clock is displayed
for about 8 seconds.

.


.

repeatedly
11
GB