Table of Contents
Advertisement
User Guide
✍
You are recommended to remove the memory stick before shutting down the computer.
If an error message appears when you remove it, insert the memory stick into the slot again and press <ENTER>. Wait until the active application finishes, then remove
the memory stick. If the message confirms the ejection of the card, click OK.
Please do not remove the Memory Stick when the memory card access lamp is on. Otherwise, the card may not be detected the next time it is inserted into the slot. If the
stick is removed by mistake and is subsequently not detected, please shut off the power of the computer, wait ten seconds and then turn it on again.
Write-protecting Memory Sticks
Some Memory Sticks are designed with an erasure prevention switch to protect valuable data from accidental erasure or overwriting.
Move the tab horizontally or vertically to set or release write-protection. When the erasure prevention switch is off, data can be saved
on the Memory Stick. When the erasure prevention switch is on, data can be read from but not saved on the Memory Stick.
n N
34
Using your VAIO computer
Advertisement
Table of Contents
