Table of Contents
Advertisement
User Guide
Before using the keyboard
Before attempting to use the wireless keyboard, you must enable
communication between the computer and the keyboard.
4 AA batteries, for use in the wireless keyboard, are supplied with your
VAIO.
To connect the wireless keyboard, proceed as follows:
1
Insert the 4 AA batteries into the wireless keyboard as shown (1).
2
Connect the receiver to a USB connector on the main unit (2).
3
Turn on the computer.
4
Slide the power switch on the right-hand side of the keyboard to
turn on the keyboard (3).
5
Press the CONNECT button on the receiver (4).
6
Turn the wireless keyboard over and press the
CONNECT button (5).
You need to press the CONNECT button within 30 cm of the
receiver!
Communication between the wireless keyboard and the computer
is now active.
✍
If your wireless keyboard does not operate properly, the batteries may need to be
replaced. To avoid battery leakage, switch off the wireless keyboard when not used for
an extended period of time. Always use new batteries from the same brand.
If you want to put the keyboard in a more 'ergonomical' position, open the keyboard feet.
n N
14
Using your VAIO computer
Advertisement
Table of Contents
