LG DR788 Owner's Manual page 127

3D Surround
DVD ALL
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
1. Press DISPLAY twice during playback. The On-
Screen Display appears on the TV screen.
2. Use v / V to select the Sound icon in the On-
Screen Display.
3. Use b / B to select "3D SUR".
To turn off the 3D Surround effect, select
"NORMAL".
Finding Locations on a Disc
You can directly access any point on a video CD
using this function. Use this function only while a
video CD is playing. Playback jumps to the point
specified.
1. Press SEARCH during playback.
The progress bar appears on the TV screen.
2. Use b / B to find a start position for playback.
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
Note:
This function works only when no marker is
memorized.
Last Condition Memory
This recorder memorizes the user settings for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically recalled.
Notes:
Settings are stored in memory for use any time.
This recorder does not memorize settings of a disc
if you switch off the recorder before commencing to
play it.
PIP (Picture in Picture)
VCD DivX
This function enables you to view the stored stations
in sub picture during playback.
VCD
On and off
Input mode selection for sub picture
Program selection for sub picture
Sub picture position change
DVD
Press PIP to switch on the sub picture, press this
button again to switch it off.
Press AV/INPUT to select the input mode for the
sub picture. Each time this button is pressed, each
input mode for the sub picture is displayed as
shown below.
Tuner → AV1 → AV2 → AV3
Use PR/CH (+/-) to change the program when sub
picture's input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Press b / B repeatedly until desired position is
achieved. The sub picture moves clockwise or
counterclockwise.
DVD ALL VCD
27