Table of Contents
Advertisement
Dismounting the HP MCS from the shipping pallet
To dismount the HP MCS, reverse the process for assembling the shock pallet. Figure 12 illustrates the
dismounting process for the HP MCS.
HP MCS
Figure 12.
dismounting steps
Installation service
In the United States, HP can arrange to have your HP MCS installed by qualified service providers.
This installation service covers the entire hardware installation sequence, from unpacking the
components to routing cabling and running a test of the system. Installation can also be provided
directly by HP authorized service providers.
If you need a pre-certified solution, contact the high performance technical computing (hptc) solutions
group at http://h71028.www7.hp.com/enterprise/cache/284965-0-0-225-121.html.
Spares kits
Contact your local reseller for information on spares kits.
Additional tools and equipment
• 11/16-in (or 17-mm) open-end wrench
• 9/16-in (or 14-mm) open-end wrench or socket
• 7/16-in (or 11-mm) open-end wrench or socket
• 8/16-in (or 12mm) open-ended wrench or socket
• Stretch wrap
• Banding
• HP MCS hex water connection wrench
21
Advertisement
Table of Contents
