Table of Contents
Advertisement
Figure 9 illustrate the door clearance for the HP MCS.
Figure 9. HP MCS door clearance
Note:
There is a potential for front or rear door swing interference when
arranging the HP MCS immediately next to an HP 10000 Series rack. It
may be necessary for the removal of a rack door for full, unimpeded access
to the adjacent rack.
Qualified shipping
The HP MCS ships pre-installed to a 10000 G2 Series rack. The MCS is CTO-capable for up to 2000
Lbs and ships standard with a shock pallet. The MCS can be used to factory-integrate IT equipment at
Factory Express or other configuration services.
Standard shipping pallet
The HP MCS ships on a special wooden shock pallet with plastic shrink-wrap around the HP MCS.
Component installation may occur at the customer site, at a VAR or integrator, or at HP Factory
Express.
Note:
Wooden components of the pallets have been properly treated to comply
with the pest-free certifications required by foreign countries.
15
Advertisement
Table of Contents
