30
en | Installing a MIC Camera on a Hinged DCA
MIC IP fusion 9000 HD
7. For inverted installation, apply a small amount of grease to the primary O-ring to hold it in
place.
8. Push the wires from the camera base into the DCA while positioning the base pin of the
camera under the DCA hook (item 1). Avoid pinching the wires! (item 2). Loosen the hook
bolts, and then slide the hook down to secure the camera pin. Fully tighten the hook bolts
(item 3).
2021-05 | 1.3 | F.01U.334.820
Bosch Security Systems
Installation Manual