Table of Contents
Advertisement
6
Energy-saving tips
Economic hot water production
Set the desired temperature of your domestic hot water cyl-
inder only to the temperature you actually need, and under
no circumstances higher than 60 °C.
You should also use the "Time programmes" function for
hot water production in the "Automatic mode". Set the
period so that the water is brought to the desired hot water
temperature shortly before it is needed, e.g. in the morning
after getting up and in the evening after you return home.
If you do not need any hot water for a longer period of
time, switch hot water production off.
Ventilate correctly
A ventilation boost with fully opened windows and, where
possible, with a draught is essential for the room climate
and room temperature. The room air will be replaced by
outside air in 5 to 10 minutes during a ventilation boost.
The air humidity falls and the room is easier to heat up. You
will feel warmed even if the room temperature is the same.
34
Operating instructions timeSWITCH 160 0020132032_00
Advertisement
Table of Contents
