Operation; Operating Concept; Operation Via Selector Buttons - Vaillant timeSWITCH 160 Operating Instructions Manual

4

Operation

4.1

Operating concept

The timer is operated with two selector buttons and a
rotary knob (¬ section. 3.1)
With the selector buttons you can:
– navigate through the selection levels and the setting
level in the menu structure (¬ tab. 4.2),
– highlight a setting,
– confirm a value,
– activate a mode,
– cancel changing a value.
Use the control knob to:
– navigate through the list entries of a selection level by
turning the control knob to the left or right,
– highlight a selection level or a setting level,
– change a selected value.
The display shows a highlighted selection level, a setting
level or a highlighted value with white font on a black back-
ground. A flashing, highlighted value means that you can
change the value.
Operating instructions timeSWITCH 160 0020132032_00
i
If you do not operate the timer during a period
of more than 5 minutes, the basic display
appears in the display again.
4.1.1

Operation via selector buttons

Example: Changing the date
You wish to change the date.
The display shows the basic display.
If the display does not show the basic display, press the left
selector button "Back" until the basic display appears.
Auto 01.07.11
Menu
4.1 Basic display
> Press the left selector button "Menu".
Operation 4
15:34
Mode
13