Canon MultiPASS MP730 Quick Reference Manual page 87

Name
3. ACTIVITY REPORT
3. TX SETTINGS
1. ECM TX*
2. MID PAUSE SET
3. AUTO REDIAL
1. REDIAL TIMES
2. REDIAL
INTERVAL
4. TIME OUT
5. TX START SPEED
6. COLOR DIRECT TX
4. RX SETTINGS
1. ECM RX*
2. FAX/TEL AUTO SW
1. RING START TIME Selects the time the machine takes to check whether a
2. F/T RING TIME
3. DEFAULT
ACTION
3. DRPD:SELECT FAX
* ECM stands for Error Correction Mode. Resends image data that was lost due to phone line interference so thereby making
sent and received images seamless.
11-4
Machine settings
Description
Enables/disables automatic printing of an ACTIVITY
REPORT after every 20 transactions.
—
Enables/disables Error Correction Mode (ECM) during
sending.
Selects the pause length when you press [Redial/Pause]. 2 SEC (1 to 15)
Enables/disables automatic redialing.
If you select <ON>, selects the number of redialings.
If you select <ON>, selects the length of time between
redialings.
Enables/disables automatic scanning without having to
press [Start] after using speed dialing or redialing to
send a document.
Selects the speed at which the machine starts
transmitting.
Enables/disables sending of color documents to fax
machines that do not have color faxing capability.
—
Enables/disables Error Correction Mode (ECM) during
reception.
If you select <FAX/TEL AUTO SW> as the receive mode,
customizes its settings.
call is a fax or voice call.
Selects the ring length for voice calls.
Selects whether the machine switches to receive mode
after the ring time has elapsed, or whether it
disconnects the call.
If you select <DRPD> as the receive mode, select the
ring pattern for the machine.
Setting Details
AUTO PRINT ON UG
AUTO PRINT OFF
—
ON
OFF
ON UG
OFF
2 TIMES
(1 to 10)
2 MIN. (2 to 99)
ON
OFF
33600bps
14400bps
9600bps
7200bps
4800bps
2400bps
OFF
ON
—
ON
OFF
— UG
8 SEC (0 to 30)
15 SEC
(10 to 45)
RECEIVE
DISCONNECT
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
Chapter 11