MSI IB3 User Manual page 33

3d-agp vga / 3d-audio m/b for socket 370 processor
Table of Contents

Advertisement

The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each of
the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines the
best mode for each device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode
4.
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33 and
Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector read/write. If
your IDE hard drive supports block mode (most new drives do), select Enabled for automatic
detection of the optimal number of block read/writes per sector the drive can support. The
settings are: Enabled, Disabled.
3-7-2 OnBoard PCI DEVICE
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
USB Controller
USB Keyboard Support
** AC97 Codec is ALC100/200 **
AC97 Audio
Game Port Address
Midi Port Address
Midi Port IRQ
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
USB peripherals. The settings are: Enabled, Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and you have
a USB keyboard. The settings are: Enabled, Disabled.
AC97 Audio
This item allows you to decide to enable/disable the OnBoard AC 97' Codec chip to support
Audio function. The settings are: Auto, Disabled.
Game Port Address/Midi Port Address
OnBoard PCI DEVICE
Enabled
Disabled
Auto
201
330
10
F6:Optimized Defaults
30
Item Help
Menu Level >>
F1:General Help
F7:Standard Defaults

Advertisement

Table of Contents
loading

Table of Contents