Table of Contents
Advertisement
4. PS/2 Mouse Connector (5-pin block): MS _ PIN
If you are using a PS/2 mouse, you must purchase an optional PS/2 mouse set which
connects to the 5-pins block and mounts to an open slot on your computer's case.
5. Parallel Printer Connector (26-pin Block): LPT
Connection for the enclosed parallel port ribbon cable with mounting bracket. Connect
the ribbon cable to this connection and mount the bracket to the case on an open slot. It
will then be available for a parallel printer cable.
NOTE:
Serial printers must be connected to the serial port. You can enable the parallel
port and choose the IRQ through BIOS Setup.
6. Serial port COMA and COMB Connector (Two 10-pin blocks): COM1, COM2
These connectors support the provided serial port ribbon cables with mounting bracket.
Connect the ribbon cables to these connectors and mount the bracket to the case on an
open slot. The two serial ports on the mounting bracket will then be used for pointing
devices or other serial devices. See BIOS configuration of "Onboard Serial Port"
15
Advertisement
Table of Contents
