In "Miscellaneous Control" section of CMOS setup Utility, you can setting the CPU clock
by BIOS setting please refer
2.
V I/O Voltage setting (3-pin) : JP2
3.
Keyboard Power On Function setting (3-pin) : JP8
This allows you to disable the keyboard power on function. Set the jumper to enabled or
disabled if you wish to use your keyboard (by pressing < >) to power on your computer,
this feature requires an ATX power supply that can supply at least 300mA on the +5VSB
lead. The default is set on disable.
4.
Clear Keyboard Power On password setting (3-pin) : JP10
You can set keyboard power on function password to assure computer security to setting
password through BIOS SETUP, and you can clear keyboard power on password by
JP10.
page
11.
7