Personalisations; Setting The Temperature; Functions - Ariston AV 102 Instructions For Use Manual

Personalisations

Setting the temperature

Turn the TEMPERATURE knob to set the wash temperature (see Programme table on page 18).
The temperature can be lowered, or even set to a cold wash ( ).

Functions

To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Function Effect
Bleaching cycle
designed to
remove the
toughest stains.
Bleaching
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
Easy iron iron.
Increases the
efficiency of the
rinse.
Extra Rinse
Reduces the
spin speed.
1000-500
Comments
Please remember to pour the bleach into extra compartment 4
(see page 20).
This function is incompatible with the EASY IRON function.
When this function is set, programmes 6, 7, 8, 10, 11 and
Delicate rinse will end with the laundry left to soak (Anti-crease)
and the Rinse cycle phase LED
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.
This function is incompatible with the BLEACHING function.
Recommended when the appliance has a full load or with large
quantities of detergent.
will flash.
GB
Enabled with
programmes:
2, 3, 4, 5,
6, 7, 8,
Rinse cycles.
All
programmes
except for
1, 2, 9, 10
and Draining.
1, 2, 3, 4,
5, 6, 7, 8, and
Rinse cycles.
All
programmes
except for 11
and draining.
19