Alarms Snooze And Sleep - PURE Evoke Series User Manual

Alarms snooze and sleep

As well as a clock/calendar, there are two versatile wake-up alarms with snooze facility, and a sleep function
to turn the system off after a set period of time. The alarm sound for each alarm can use a buzzer or a selection
from the audio sources.
To set the clock/calendar
The settings for the internal clock are all accessible via the Systems Setting menu – Time/Date
The Alarm and Sleep timer options are in the Main Menu.
Snooze duration can be changed whilst an alarm is triggering by pushing Select.
To set alarms
Note: Alarms will only function when your Evoke unit is On or in Standby mode.
An active alarm is indicated by its icon in the bottom line of the display.
Enter the Alarm option through the Main Menu and use the Navigation Arrows to select the
required Alarm 1 or 2.
To exit alarm setting mode, press the Left/Back (alternatively, the Alarm display will timeout and
automatically return to the Now Playing screen after a short time). Any changes to the alarm
settings are lost if you let the menu time out.
The alarm setup prompts you for the following parameters. Select a value for each parameter
in turn turning the select control button and press Select to confirm and move on to the next
parameter.
In all listening modes active alarms are indicated by displaying the relevant Alarm 1 and/or Alarm
2 icons.
At the set time, the alarm will sound, quietly at first, then gradually building up to the set volume.
When an alarm sounds, the icon in the display flashes.
Long press the volume dial to fully cancel a sounding alarm and switch the radio to standby.
Snooze
To temporarily silence a sounding alarm for 5min, press the volume dial once.
You can change the snooze period by repeatedly pressing the select button. Snooze periods are
5, 10, 15 and 30 minutes.
The radio returns to standby for the set time period with a snooze countdown displayed. When
the countdown reaches 0 (zero) the alarm is triggered again..
Parameters
Enable – Off | On
Frequency - Daily | Once | Weekends | Weekdays
Choose the days on which the alarm is active.
Note: if you choose 'Once' , you are prompted to enter the required date.
Time – hours and minutes
Mode – Buzzer | Internet radio | DAB | FM | CD (Evoke Home only)
If Internet Radio, DAB or FM radio is chosen as the audio source a preset
menu is displayed which allows you to select the station.
Volume – use the navigation arrows to set the required alarm volume.
This is the volume the alarm will build up to. (Initially the alarm sounds at
a low volume and gradually gets louder to the set volume).