PURE Evoke Series User Manual page 16

CD
(Evoke Home only)
To enter CD mode: press Source and tap Source until CD is highlighted. Press Select to activate.
You can also use the Navigation Arrows to select your source.
The following CD formats are compatible: MP3, WAV, CD-R, CD-RW, CD-DA, WMA.
Inserting a CD
Switch to CD mode and insert your CD, label facing towards you.
When you first insert a CD, your Evoke displays 'Loading' for a few seconds while the CD loads.
After a few seconds, your CD will start to play automatically.
Note: A CD can only be inserted when your Evoke is in CD mode.
Playing a track
During audio CD playback, your Evoke's display shows the track number and the amount
of time the track has been playing. Evoke will also display the file name if this is available.
Repeating tracks
You can use the 'Repeat' setting on your Evoke to repeat the track that is currently
playing or the entire CD. To change the 'Repeat' setting press the Menu button and
navigate to and press Select 'Repeat' .
You can select from one of the following repeat options:
Shuffling tracks
You can use the 'Shuffle' setting on your Evoke to listen to shuffle the tracks on your CD.
To change the 'Shuffle' setting either use the remote control or press the Menu button
and navigate to and press Select 'Shuffle' .
Ejecting a CD
Press the eject button on the top of your Evoke in any mode to eject a CD.
Wait until Evoke displays 'Eject' and remove the CD.
AUX
(Evoke Home only)
Connecting a device with an auxiliary cable
You can use an auxiliary cable to connect a device, such as an MP3 player, to your Evoke.
You can then enjoy music saved on the device through your Evoke.
To connect a device with an auxiliary cable:
Your Evoke is now ready to play music from the connected device.
Repeat one: Select this option if you want to repeat the track that is currently
playing.
Repeat all: Select this option if you want to repeat the entire CD.
Normal: Select this option if you don't want to repeat any tracks or the entire CD.
Shuffle: Select this option if you want to enable track shuffling.
Normal: Select this option if you want to disable track shuffling.
1. Press Source and tap Source until Auxiliary input is highlighted, press Select to
activate.
2. Insert an auxiliary cable into the Aux in socket on the back of your Evoke.
3. Insert the other end of the auxiliary cable into the device you want to connect.