Troubleshooting - JVC KD-AR870 Instructions Manual

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service
center.
Symptoms
• Sound cannot be heard from the
speakers.
• The unit does not work at all.
• "Connect Error" appears on the
display.
• SSM automatic presetting does not
work.
• Static noise while listening to the
radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played
back.
• Tracks on the CD-R/CD-RW cannot
be skipped.
• Disc can be neither played back nor
ejected.
• Disc cannot be recognized ("No
Disc," "Loading Error," or "Eject
Error" flashes).
• Disc sound is sometimes interrupted. • Stop playback while driving on rough roads.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("File Check" keeps flashing on the
display).
• Tracks do not play back in the order
you have intended them to play.
32
All manuals and user guides at all-guides.com
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 2).
Remove the control panel, wipe the connector,
then attach it again (see page 2).
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component
• Unlock the disc (see page 13).
• Eject the disc forcibly (see page 2).
Eject the disc forcibly (see page 2).
• Change the disc.
• Check the cords and connections.
• Use a disc with MP3/WMA tracks recorded in
• Add the extension code <.mp3> or <.wma> to
Skip to another track or change the disc. (Do not
add the extension code <.mp3> or <.wma> to
non-MP3 or WMA tracks.)
Do not use too many hierarchies and folders.
Playback order is determined when the files are
recorded.
Remedies/Causes
which you used for recording.
the format compliant with ISO 9660 Level 1,
Level 2, Romeo, or Joliet.
the file names.