Fm Rds Operations - JVC KD-AR870 Instructions Manual

1
Follow steps 1 and 2 of "Using the
number buttons" on page 8.
• By holding 5 / ∞, the Preset Station List
will appear (go to step 4).
2
3
Display the Preset Station List.
4
Select the preset number you want to
store into.
• You can move to the lists of the other FM
bands by pressing number button 5
( ) or 6 (
5
Store the station.
All manuals and user guides at all-guides.com
) repeatedly.
Listening to a preset station
Using the number buttons
1
2
Select the preset station (1 – 6) you
want to listen to.
Using the Preset Station List
1
Display the Preset Station List, then
select the preset station you want to
listen to.
2
Change to the selected station.

FM RDS operations

What you can do with RDS
RDS (Radio Data System) allows FM stations
to send an additional signal along with their
regular programme signals.
By receiving the RDS data, this unit can do the
following:
• Programme Type (PTY) Search (see page 10)
• TA (Traffic Announcement) and PTY
Standby Receptions (see page 11)
• Tracing the same programme automatically
—Network-Tracking Reception (see page 12)
• Programme Search (see page 21)
Continued on next page...
9