Radio Operations - JVC KD-AR870 Instructions Manual

3 Press ¢
Then, turn the control dial to select
"24Hours" or "12Hours," time
display mode.
3
Exit from the setting.
To check the current clock time when the
power is turned off
Changing the display pattern
Ex.: When tuner is selected as the source
Source operation display
"SMALL" (CD jacket image) graphic*
"LARGE" (full display size) graphic*
All manuals and user guides at all-guides.com
to select "24H/12H."
1 is displayed.
*
2
1 is displayed.
Audio level meter is displayed (see "LevelMeter" on page 20).
Goes back to the initial display pattern.
* 1 You can use your edited file for graphic screen
(see pages 23 – 26).
Depending on a downloaded file, it may take
a longer time to show it on the display.
* 2 The information bar will disappear if no
operation is performed for five seconds.

Radio operations

~
Ÿ
!
Start searching for a station.
When a station is received, searching
stops.
• When receiving an FM stereo broadcast
with sufficient signal strength,
lights up on the display.
To stop searching, press the same button
again.
Note:
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
Continued on next page...
7