Table of Contents
Advertisement
STEP 6 - ATTACHING THE CANOPY TRIM RING
At this point you have finished hang-
ing the fan and are ready to install
the canopy trim ring.
1. To easily install the canopy trim
ring, locate the two tabs on the
canopy trim ring. (See Figure 6a.)
Tabs
Figure 6a - Canopy Trim Ring
41467-01 8/14/2001
All manuals and user guides at all-guides.com
2. Rotate the canopy trim ring so
that the two tabs are 90 degrees
or perpendicular to the two
canopy screws. (See Figure 6b.)
Ceiling
Plate
Hooks
Canopy
Screw
Press
Here To
Remove
Canopy
Canopy
Trim Ring
Canopy
Trim Ring
Figure 6b - Placement of the Trim
Ring
3. Take both hands and push the
canopy trim ring up to the top of
the canopy. (See Figure 6c.)
Ceiling
Plate
Canopy
Screw
Press
Here To
Figure 6c - Attaching the Canopy
Remove
Trim Ring
4. The canopy trim ring will snap
Tab
and lock into place on the canopy.
Canopy Trim Ring
Canopy
Note: To remove the canopy
trim ring, press firmly on oppo-
site sides of the ring towards the
canopy as shown in Figure 6b.
The tabs will flex out releasing
the trim ring from the canopy.
®
15
Advertisement
Table of Contents
